The intelligent alignment platform
All-in-one: High-end system for shaft alignment and geometric measurements
- Hundreds of positions measured, automatic evaluation of measurement quality and filtering of measurement points: intelliSWEEP.
- Convenient alignment of uncoupled shafts: intelliPASS mode.
- One-step machine corrections: simultaneous monitoring of machine corrections in vertical and horizontal directions at any sensor position (Live Move).
- Handles any amount of misalignment (InfiniRange) including extra-large detector.
- Integrated Bluetooth module: no extra accessories required.
- Save measurement reports as PDF to a USB stick: no PC required.
- Optional expert modules for more alignment applications.
No matter whether it is a motor-pump set or turbomachinery trains, ROTALIGN Ultra iS is a highly versatile system made to handle alignment on all types of rotating machines. This best-of-breed laser alignment system will save you a lot of time and effort!
With intelliSWEEP, you only get the best measurement results under any external and environmental conditions. Using a number of quality factors such as vibration and backlash, poor quality measurement points are automatically filtered out.
Live Move enables one-step machine adjustments through the simultaneous monitoring of machine corrections in both vertical and horizontal directions with the sensor at any angular position on the shaft. Not only does this save a lot of time and effort but it is also extremely useful in case of restricted access to predetermined shaft positions.
The modular system is easily configured with expert modules such as Vibration Acceptance Check, Live Trend for the monitoring of thermal growth, simultaneous multi-coupling measurement, RFID machine identification, and geometric measurements.