Kalibrasi Olympus Nortec 600D

Kami membantu customer dalam melakukan kalibrasi Olympus Nortec 600D dengan output sertifikat kalibrasi dari manufactur (Olympus). Dengan Kalibrasi Olympus Nortec 600D secara periodik, customer akan mendapatkan kepastian mengenai hasil pengukuran alat tersebut.

Kalibrasi Olympus Nortec 600D

Olympus converges its latest advancements in high-performance digital circuitry and eddy current flaw detection into one compact and durable portable unit—the new NORTEC® 600. With its crisp and vivid 5.7 inch VGA display and true full-screen mode, the NORTEC 600 is capable of producing highly visible and contrasting eddy current signals in any lighting condition.
The redesigned interface of the NORTEC 600 borrows the intuitive, knob-operated navigation of its NORTEC predecessors and combines it with the simple menu structure and highly efficient direct-access keys of other popular Olympus instruments. Available in four versatile models, the NORTEC 600 offers a wide range of innovative functionalities, including an Application Selection menu, an all-in-one display, real-time readings, and signal calibration in Freeze mode, ensuring that inspections are quick and easy for any level of operator.

Reliable and Robust
Based on an already field-proven instrument case, the NORTEC 600 is built for endurance in harsh field conditions. Its casing’s durability and resistance to extreme weather makes the NORTEC 600 an instrument you can trust for any eddy current inspection job.

Key Features
Designed to meet the requirements of IP66.
EN-15548 compliant.
Long battery life (up to 10 hours).
Bright, 5.7 inch (14,5 cm) VGA display.
Full-screen option in any display mode.
Improved filters for rotary scanner mode.
Intuitive interface with Application Selection presets.
All-settings configuration page.
10 Hz to 12 MHz frequency capacity.
Automatic internal balancing (BNC connector).
Up to two real-time readings.
True automatic mixing.
Storage capacity of up to 500 files (program and data).
On-board file preview.

Versatility and Compatibility(Highest-end Nortec 600D Model in Listing)
The NORTEC® 600 is available in four versatile instrument models to meet the widest range of inspection needs. From the basic model upward, each unit unlocks more features. For maximum convenience, additional features can also be unlocked remotely

Portable and Lightweight
The NORTEC 600 weighs only 1.6 kg and is delivered with a factory-installed hand strap that provides direct thumb access to the key controls, offering genuine handheld versatility to operators.

Two Probe Connectors
All models of the NORTEC 600 come with the standard LEMO 16-way universal connector, as well as a BNC connector for absolute probes. Simply select the connector in the instrument interface. When reading from the BNC connector, the instrument features automatic internal balancing for hassle-free operation.
The 16-way LEMO connector also supports the PowerLink NORTEC technology, which features automatic probe recognition and instrument presets for quicker setups.

Compatible with Current Procedures and Other Manufacturers
To simplify inspection, the NORTEC 600 includes all the legacy modes and layouts used in existing NORTEC-specified procedures, as well as those used by many other equipment manufacturers. Standard impedance plane view, sweep mode (strip chart), split screens, adjustable null point, crosshairs, improved filter response, reference signal display, and several other useful features are all part of the NORTEC 600 package.
Offering compatibility with many other probe and rotary scanner manufacturers, the NORTEC 600’s accessories include cables and adaptors such as a 12-way LEMO, an 11-way Fischer, and more. The proper adaptor or scanner cable make it possible to benefit from all the outstanding capabilities of the NORTEC 600, without investing heavily in probes and accessories.

One of the Most Brilliant Displays in the Industry
Vibrant VGA Display

The NORTEC® 600 has one of the most brilliant displays available on the portable eddy current flaw detector market. The unique brightness, resolution, and definition of its 5.7 inch VGA display makes it possible to interpret eddy current signals at a distance. The user-selectable color schemes ensure that the display is equally clear and easy-to-read whether you are using the NORTEC 600 indoors or outside. 

True Full-Screen Display
In addition to impressive size and brightness, the NORTEC 600’s VGA display also features a new full-screen mode that can be activated at the touch of a key.
Available for all applications and in all display modes, the full-screen mode really comes in handy when reading signals over an extended period of time.
Depending on your NORTEC 600 model, you can choose between the following displays:
  -single impedance plane.
-dual impedance plane.
-sweep (strip chart).
-split screen (sweep + impedance).
-waterfall.
-dual impedance plane.
-all-in-one display featuring up to 3 configurable traces.

For other calibration service for instrument, please check here

Kalibrasi dan Repair Flir Camera

Dalam meningkatkan keakuratan peralatan predictive maintenance, kami menyediakan jasa Kalibrasi dan Repair Flir Camera berbagai tipe baik tipe T, E atau tipe yang lain. Dengan support dari manufacture, jasa Kalibrasi dan Repair Flir Camera memberikan tingkat kehandalan yang tinggi serta delivery time yang cepat

FLIR cameras are designed and factory calibrated for accurate temperature measurements and thermal imaging. When maintained with FLIR’s annual calibration services, they will be highly reliable in spotting thermal anomalies and other temperature phenomena. Without proper maintenance and calibration, accurate measurements cannot be assured.

Kalibrasi dan Repair Flir Camera

14-Point Inspection & Calibration Program

FLIR´s exclusive 14-Point Inspection & Calibration program uses temperature references that are calibrated annually and traceable to the SP Technical Research Institute of Sweden, and the National Institute of Standards and Technology (NIST). The program includes the following steps:

FLIR 14-Point Inspection & Calibration Program:

  1. Perform a complete operational check
  2. MSX® calibration and laser alignment, when applicable
  3. Verify all internal cable and PCB connections
  4. Clean viewfinder and check optics
  5. Upgrade internal camera software to latest revisions
  6. Perform minor repairs
  7. Verify and/or re-equalize as needed each temperature range for image uniformity
  8. Verify standard lens calibration (others or special engineered lenses, optional)
  9. Verify ambient temperature compensation as needed
  10. Re-calibration to ensure it meets factory specification
  11. Calibrate temperature ranges up to +1,500°C, when applicable
  12. Perform quality approved acceptance test procedure
  13. Provide calibration label with next due date

This calibration output is Calibration Certificate from manufacture (Flir). if you need more information about other calibration services such as calibration Emerson CSI 2130 / 2140 or Flow meter, please contact us at sales@gammaenergi.com or 0815-131-66-131

Calibration & Repair Pruftechnik Laser Alignment & Vibration Analyzer

Kalibrasi Laser alignment to check accuracy of Pruftechnik systems like OPTALIGN®, ROTALIGN®, VIBScanner (I & II), VIBXpert (I & II), and also Vibration Sensor (such as CTC product) should be checked every two years as indicated by the warning message that appears on the instrument’s display 4 weeks before the deadline or worn and damage indication for the vibration sensor

Get the best out of your alignment or vibration system
· Calibration in our high-tech test and calibration lab
· Repair service
· Providing replacement tools/analyser during calibration or repair services

kalibrasi laser alignment
kalibrasi laser alignment

Our calibration ( Kalibrasi Laser alignment ) service includes :
· Cleaning and inspection of the system, including parts to make sure all are in proper working condition
· Check system operation, including any preventative repair if needed to makes ure the system works as a whole
· Update system firmware to current version (if applicab le)
· Sertificate Manufacture and/or KAN

The calibration accuracy of Pruftechnik systems like OPTALIGN®, ROTALIGN®, VIBScanner (I & II), VIBXpert (I & II), and also Vibration Sensor should be checked every two years as indicated by the warning message that appears on the instrument’s display 4 weeks before the deadline or worn and damage indication for the vibration sensor

For further information please conctact iman@gammaenergi.com or Call
+6281213474560

Kalibrasi Flow Meter and Tera Ulang Dinas Metrologi

PT GAMMA ENERGI PRATAMA has calibration services ( kalibrasi flow meter dan tera ulang Dinas Metrologi ) to calibrate the flow meter and water meter. This is needed to ensure the flow meter and water are in good condition and the reading is still accurate. We can do a calibration ( kalibrasi flow meter dan tera ulang Dinas Metrologi ) by high services, short-duration calibration time and competitive price.

The output of our calibration are certificates from laboratory KAN accredited as well as getting legality with Sertifikat Kalibrasi Flowmeter dan Tera Ulang Dinas Metrologi.

We also supply flow meter and water meter either for industrial or building. We supply high quality of flow meters included Liquid turbine flow meter, Electromagnet Flow Meter, Thermal Mass Flow Meter, Gas Mass Flow Meter and more.

Jasa Kalibrasi Flow Meter dan Tera Ulang Dinas Metrologi

Some of the brands we are supplying are Krohne, Tokico, LC, FC, avery hardoll, Tokyo Keiso, and other brands

Jasa Kalibrasi Flowmeter dan Tera Ulang Dinas Metrologi

One of water meter we can supply is water Meter Onda Brass body with size 0.5 inc, 1 inch, 1.5 inches, etc

You also can find and explore our other products such as valve, level, pressure and temperature transmitter.

Information about Flow Meter Calibration & Tera Ulang Dinas Metrologi and supplying flow meter please call 081213474560 or iman@gammaenergi.com

Contact Us On WhatsApp